[200q20v] 1st trip to dealer

Paul Waterloo pwaterloo at compuserve.com
Fri Feb 23 08:29:09 EST 2001

I agree with Mike, $600 bucks for a bouncing speedo fix? You can fix it yourself by soldering connections in there.....the amount of knowledge on this list is incredible. I can fix anything that breaks on my car myself without the help of the list, now I just query the list and my troubleshooting time and repair time are cut to either nothing (troubleshooting) or something like half....

Chris's web site is awesome, has most of the answers there.

I would save the $600 for eurolights and do the bouncing speedo myself.....or I'll do it for you and you can buy me eurolights :-)

Dealers aren't all bad, but I just don't think they can compare to our collective wisdom.....

Paul Waterloo
Applied Energy Services
Phone 708-524-9464
Fax 708-524-0079
Voicemail/pager 888-962-7304
pwaterloo at compuserve.com

  ----- Original Message ----- 
  From: Mike Miller 
  To: Tomsaudi200 at aol.com ; 200q20v at audifans.com 
  Sent: Friday, February 23, 2001 1:35 AM
  Subject: Re: [200q20v] 1st trip to dealer

  ----- Original Message ----- 
  From: Tomsaudi200 at aol.com 

  Well guys, I finally hauled my car to my local Audi dealership, only to be 
  surprised that one of the staff not only owns a 91 200 Quattro, but is also a 
  fellow lister here. Not wanting to put anyone in an uncomfortable position 
  here, I will not name the dealer I went to.

  I had the KF recall performed (the airbag sensor). Plus a fog light bulb had 
  burned out, and you guys already know the rest about the stalling, bouncing 
  speedo, and the POP of the stereo. I know you guys offered possible 
  explanations to my problems, which of course I appreciate. I want to approach 
  a dealership with my problems as educated as I can possibly be-1. so they 
  take me seriously and 2. so I can't be conned into doing unneccessary 

  Wellll.......dealing with the service manager, all talk on e-mail lists 
  leaves a lot of room for rumors and misinformation, or so I am told. My main 
  concern here is that we are dealing with a car that was imported to America 
  in the hundreds, not ten's of thousands. In any case, I feel a little better 
  knowing one of the guys there has the same car as me. 

  Ok, I won't keep you guys hanging any longer-here are the dealer's solutions 
  to my car's problems:

  POP in stereo speakers: blown diode. Cost: $193
  Erratic speedo, problem believed to be linked to the stalling: printed 
  computer board,. Cost: $593. 

  So, we're basically talking $700 for a couple of minor problems. 

  This sound in line to you guys, or am I being taken?


  Sounds to me like the dealer doesn't know that much. The dealer I used to deal with was on one of the regional Audi lists. And they seemed to take it seriously. I'll name it - University Audi in Seattle and Douglass was great to work with as was Bjorn.  Personally, I have saved literally thousands of $$ from the Audi and Ford truck lists that I belong to. 

  The speaker pop can be fixed with the _ addition_ of a xener diode that is covered in an Audi TSB from about 1990 - I don't have the number handy, but surely the dealer does.  The problem is an inductance spike  when the A/C compressor turns off, not a bad diode that is already there - the diode doesn't exist! The cost to install the parts referenced in the TSB is in line with expectations. HOWEVER, there are way cheaper fixes. I'm sure another lister will detail it out for you.

  The bouncing speedo is almost certainly a loose connection and or bad solder joints - I would say the majority of the 91 200q's I have heard of has had the problem, including mine.

  The stalling can be a symtom of the A/C inductance spike according to the TSB - I have yet to see it happen personally and mine does  the pop. BTW, a new compressor did not fix the problem. I forget what you say the stalling symtoms are, but if it is lifting the throttle and the tach just falls to 0, most likely suspect is the Turbo Bypass Valve. I've already replaced one and am about to replace another. They seem to last 2-3 years, in my experience. I'd be _very_ suprised if they replaced the dash "printed computer board" and it solved any stalling problem and I would definately get it in writing from them that if the stalling problem is not fixed by replacing that, there is no charge to you. That will most likely fix your bouncing speedo though.

  The fixes you reference above can be done, by you, with the help of the SJM or CM websites for about $50 and 3-4 hrs labor as a guess. Let your wallet be your guide :-)

  mike miller
  91 200q owner since May 96
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.audifans.com/pipermail/200q20v/attachments/20010223/a62d144e/attachment.htm

More information about the 200q20v mailing list