[200q20v] plug wire connection to distributor cap

C1J1Miller at aol.com C1J1Miller at aol.com
Thu Jan 4 09:39:49 EST 2001

His 10vt likely doesn't have the bypass valve installed, unless added by a 
previous owner.  I agree, either a vac leak, or just not tuned correctly.  
Run the codes!

In a message dated Thu, 4 Jan 2001  9:36:05 AM Eastern Standard Time, 
WARATAP at aol.com writes:

<< In a message dated 1/3/2001 9:06:21 PM Eastern Standard Time, 
omllenado at email.msn.com writes:  
I recently bought a 1989 Audi 200 turbo and It's a great car. Until 
recently I am experiencing stalling when coming for a stop light stop.  
The problem comes after a couple of minutes driving but it is erratic I 
think there is a vacuum leak but this I have to confirm  
Occassional stalling (after you have your plug wire problem taken care of) is 
often sign of vacuum leak or (because the 20v compensates better than the 
previous turbo cars) more likely, bad turbo bypass valve (sometimes both).   
'91 200q20v with a few mods...  
http://members.aol.com/Quattringo/index.html   >>

More information about the 200q20v mailing list