[200q20v] FW: UrS4/6 Rear Stabilizer Adapter Bracket ?? 200 TQ appilcability
mlped at qwest.net
Sat Jul 21 08:39:16 EDT 2001
For any of those who may have an interest:
excerpted from below:
...Speculation has it that the UrS4/6 and older 1991 200TQ
rear suspension set up are the same. If they are the
adapter would probably also fit the earlier car - but I
have not BTDT with a 100/200 chassis.
> -----Original Message-----
> From: mlp [mailto:mlped at qwest.net]
> Sent: Friday, July 20, 2001 6:41 AM
> To: s-car-list at yahoogroups.com; s-car-list at egroups.com
> Cc: Audi - Lists - AudiFans
> Subject: UrS4/6 Rear Stabilizer Adapter Bracket
> OK, this is the last call for any interested in a rear
> stabilizer bracket / adapter kit which allows fitment of
> the Audi rear stabilizer as used on the 1992 UrS4 and
> latter (1993 model years etc. on) Avant wagons, to 1993 on
> Audi UrS4/6 sedans.
> The kit consists of two (2) adapter plates, two small lock
> "keys" (2) and a set of four (4) bolts used to bolt the two
> bushings up to the plate. To do the work, the machine shop
> has asked that I place a minimum order of at least five (5)
> kits. Costs for a kit $185 plus shipping.
> Unless there is enough interest, it does NOT included any
> of the Audi rear stabilizer parts, (i.e. the rear
> stabilizer bar, the rubber bushings, the bushing clamps, or
> the two heim joints and the replacement brake line guards,
> all of which are, or at lest were available from Audi last
> time I checked, and can be sourced directly from Audi or
> your favorite Audi parts supplier.
> Three kits have been installed & have been running on cars
> for @ year. It takes @ 20 to 30 minutes to install the kit
> and the rear stabilizer bar.
> For those interested in a kit I'd like a $100 deposit to
> cover the machine shop costs and materials. The balance
> will be do when the kits are completed before they ship.
> The kits still have to be made. My guess is they should be
> available within 3 to 4 weeks of placing the order with the
> machinist, depending on his health. I won't put in the
> order until I have the minimum of five kits.
> For personal reasons, the machinist may not be available to
> do future kits, so if you've thought about adding some of
> the 1992 suspension pieces to your 1993 and latter car this
> may be the time to do it etc.
> Speculation has it that the UrS4/6 and older 1991 200TQ
> rear suspension set up are the same. If they are the
> adapter would probably also fit the earlier car - but I
> have not BTDT with a 100/200 chassis.
> If you want a photo of the kit as installed on a car, email
> me. We've had three "test" kits made up and running on 3
> cars for @ a year now.
> Mike Pederson
More information about the 200q20v