[200q20v] Road Noise
b.m.benz at prodigy.net
Wed Jun 20 10:21:34 EDT 2001
Don't fix it if it ain't broke!
> From: "Paul Waterloo" <pwaterloo at compuserve.com>
> Date: Wed, 20 Jun 2001 10:17:41 -0500
> To: <Brian.Link at Level3.com>, <200q20v at audifans.com>
> Subject: Re: [200q20v] Road Noise
> I replaced my front bearings on my car, wasn't that hard, but I dropped the
> strut assembly and then had a 100 ton press and a set of very large sockets
> to use to press on the outer races to press the bearings in and out.
> My road noise was still there, and I then I rotated the tires and found that
> it was a bad belt in a tire. Change the tire and the noise went away.
> Go figure!
> Paul Waterloo
> Applied Energy Services
> Phone 708-524-9464
> Fax 708-524-0079
> Cell 312-961-2523
> pwaterloo at compuserve.com
> ----- Original Message -----
> From: <Brian.Link at Level3.com>
> To: <200q20v at audifans.com>
> Sent: Tuesday, June 19, 2001 11:58 AM
> Subject: [200q20v] Road Noise
>> Has any one changed out front wheel bearings on a UFO equip car?
>> I have access to the schley bearing puller, just looking for advice.
>> Also, my car is making a loud road noise, I haven't rotated the tires to
>> if that fixes it, but I will. I'm thinking it is a wheel bearing or drive
>> shaft center support bearing. Kind of a Grrr, Grrr, Grrr at slow speeds,
>> at higher speeds it is droned out.
>> Brian Link
>> 200q20v mailing list
>> 200q20v at audifans.com
> 200q20v mailing list
> 200q20v at audifans.com
More information about the 200q20v