[200q20v] 200 20VTQA Ramblings and a few Questions

Martin, Gary G MartinGG at aetna.com
Fri Mar 30 20:12:45 EST 2001

Have been workin' on my new to me(91k mi.)91 200 20vTQA, and thanks to this
list and several great web sites, things have been going well. New Bilsteins
and Bomb transformed the car. UFO brakes work very well in this car. 87
degree thermostat and new rad. fan fusable link, and lots of switch light
bulbs installed. I think I need a need a transaxle seal on the passenger
side. Oil burning smell from the cat below it. Small cover on trans. was a
bit loose, tightened that, but still have smell. Looks like a tight fit to
replace that seal. Do I have to take down the exhaust header? I hope not.
Any BTDT??
	I guess next, is to get an alignment done. But before I do this, I
feel a thumping in the steering wheel when going over rough pavement. I've
cranked down on the rack adjustment bolt and the new shocks have helped.
I've read a lot about bushing replacement, tie rod ends, ball joints, etc.
But before I replace anything, any advice would be appreciated. Is the most
likely culprit the strut top mount bushings? Also, how do I check the tie
rods and ball joints?  TIA

94 UrS4
91 200TQA    
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 2742 bytes
Desc: not available
Url : http://www.audifans.com/pipermail/200q20v/attachments/20010330/47aa860c/attachment.bin

More information about the 200q20v mailing list