[200q20v] Wire EDM machine available for 200q20v parts

Bernie Benz b.m.benz at prodigy.net
Wed May 2 08:04:27 EDT 2001

I've seen/used EDM machines in injection mold production, but not wire.  I
can only emagine that, rather than a using a preshaped profile electrode,
the wire machine uses a computer mapped/controled point electrode.  Sounds
like a slow process.  Please enlighten.  Thanks.


> From: Hot Grips® Jim Hollander <hotgrips at cyberportal.net>
> Date: Wed, 2 May 2001 07:39:14 -0400
> To: <200q20v at audifans.com>
> Subject: [200q20v] Wire EDM machine available for 200q20v parts
> We have a new Brother Wire EDM machine that is not in use much, and can be
> used to make steel (I'd rather not contaminate the filters with aluminum
> work) parts for the '91 200q20v if anyone has any suggestions.  It's
> capacity is X=10" Y=16" Z=6"
> I would be willing to make prototype parts in exchange for the sharing of
> the technical information.  Located in New Hampshire.  I have a '91 200q20v
> with 25k miles and a '01 S-8 with 300 miles.
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list