[200q20v] Hole in Radiator
b.m.benz at prodigy.net
Tue May 29 11:53:08 EDT 2001
I would try ABS plastic pipe cemment. Rough up the surface good with course
sand paper. I assume that it is a very small hole, in which case several
coats without a hard patch may be all that you need. Takes awhile to
evaporate all the solvent from a thick application though, Idling with the
press cap off will help speed up the process.
> From: "Reid, Les C." <Les.Reid at Centrilift.com>
> Date: Tue, 29 May 2001 11:07:53 -0500
> To: "'200q20v at audifans.com'" <200q20v at audifans.com>
> Subject: [200q20v] Hole in Radiator
> Hi guys,
> My radiator has developed a hole (in the plastic) from the hydraulic line
> rubbing against it.
> I want to try a patch before I spend $$ on a new one.
> Any advise on adhesive? Any BTDTs?
> Les Reid
> Tulsa ok
> 91 200q20v 155k
> 90 90q 159k
> 200q20v mailing list
> 200q20v at audifans.com
More information about the 200q20v