[200q20v] Re: [s-cars] Big Reds (actually Blacks)

Claus Vegener vegener at post7.tele.dk
Wed Nov 7 09:49:30 EST 2001

Mov'it use std. Porsche components produced at Brembo
for the rotors and callipers.
They are red (only) but without "Porsche" label
Only the brackets for the callipers and rotor-hats were
custom for the 200q20V (only front) and in fact they have to
produce these for the first time.
Price asking 4400 DDM = 2100 US$ last year including 4 braided steel lines .
Same price for GT3 or (933 Bi-turbo (black too)).
The GT3 is cast from one piece and is more rigid.
Shorter and wider leaving more free space for cooling the rotor
and the pads are slightly bigger in area. And one lbs lighter.
So they advised me to take the best - but 8x17 is needed.
The bi-turbo should fit inside 16?.
I got a discount from Mov'it but had to add VAT of 25%
in Denmark for private use.
Add 100 - 200 for freight to US.
It is a bolt-on without spacers and includes the "TÜV Gutacthen"
 for use in Denmark. I had asked BIRA for that but they don't have
papers for use of their kits in Denmark.
On the
and follow "Audi billeder" - "200"
you can have a look of the kit.
I run a company (ventilation) and
could import/ export kits for you.


----- Original Message -----
From: "Brett Dikeman" <brett at cloud9.net>
To: "Claus Vegener" <vegener at post7.tele.dk>; "Alexander van Gerbig" <Audi_80 at msn.com>
Cc: "audifan20v" <200q20v at audifans.com>
Sent: Wednesday, November 07, 2001 6:33 AM
Subject: Re: [200q20v] Re: [s-cars] Big Reds (actually Blacks)

> At 11:28 PM +0100 11/6/01, Claus Vegener wrote:
> >Mov'it offer 322x32 mm and GT3 Monoblock calipers for
> >200q20V (and for bi turbo 993 kit)
> And do you have any idea how hard it would be/how much it would cost,
> to import them into the states? A mov'it tuner would tack on a HEFTY
> amount onto the cost.
> The advantage to BIRA is that they use stock, easily obtained Porsche
> parts you can walk into any dealership and get.  Or, more
> importantly, get from any of dozens of parts suppliers, cheaper than
> dealers.
> Can you imagine the looks you'd get from a parts counter guy if you
> asked for a Gt3 part?  He'd look at you, and say "stop screwing
> around, I've got work to do."
> B
> --
> ----
> "They that give up essential liberty to obtain temporary
> safety deserve neither liberty nor safety." - Ben Franklin
> http://www.users.cloud9.net/~brett/
> http://www.users.cloud9.net/~brett/bdikeman.asc (PGP Public Key)

More information about the 200q20v mailing list