[200q20v] FW: shocks and springs question ...
t44tq at mindspring.com
Wed Nov 7 17:40:21 EST 2001
Jerry, et al.,
Those were the exact same springs used on my sedan- I believe these
are the 200q20v specific springs, not the V8 ones.
From: 200q20v-admin at audifans.com [mailto:200q20v-admin at audifans.com]On
Behalf Of Beer, Jerald
Sent: Wednesday, November 07, 2001 5:05 PM
To: 200q20v (E-mail)
Subject: [200q20v] FW: shocks and springs question ...
H&R's I used on my wagon was part # 29-800. I have the shorter Koni sports
(yellow) in front and Koni red's in the rear. The front springs were shorter
than the Eibachs I replaced. I'm not sure if these will work if you do not
have the shorter shocks in front. If some one can check the H&R book, I
think these were V8 springs. HTH
> would you have the manuf. part #'s for the following shocks and springs
> will fit a '91 audi 200 TQ 20V WAGON? i was told that the Wagon may be
> different from the sedan.
> 1. Bilstein (HD) shocks (front and rear)
> 2. H & R springs
> thank you very much in advance again.
> robert (san francisco)
200q20v mailing list
200q20v at audifans.com
More information about the 200q20v