200-20V w/ V8 front anti roll bar (S4 material).
dbpulvino at hotmail.com
Thu Dec 12 17:50:31 EST 2002
Kind of a tangent, but myself and a local amigo have talked about whether or
not the entire front subframe/swaybar setup from a C4 car would bolt on to
the t44 chassis. In the process we figured benefits would be use of a
different (newer) bushing setup/design all around, and being able to take
advantage of any geometry changes the newer setup encompassed.
Really more of a passing thought than something I ever seriously considered
doing. Time/reward ratios are all wrong in my book, but curious none the
C4's have bigger front sway bars?
From: Eyvind Spangen <eyvind.spangen at c2i.net>
To: Charles Baer <charlie at istari.com>
Cc: 200q20v at audifans.com
Subject: Re: 200-20V w/ V8 front anti roll bar.
Date: Thu, 12 Dec 2002 23:40:13 +0100
On Thu, 12 Dec 2002 09:45:13 -0700, you wrote:
>I was pretty sure my '90 had a rear bar, checked the FA and found
>stabilizer 4A0 511 409 B
My '90 V8 did not have it, but I have one here from a '96 S6, which
uses about the same rear suspension. I know some of the later V8s (92+
maybe) used a rear stabilizer.. No other type 44 had it from the
I think the mounts to the wheel bearing housing is a bolt-on, but the
rear suspension crossmember does not have the mountings. It looks
pretty easy to weld them on though..
'86 Audi 100 2.2 CS quattro
MSN 8 with e-mail virus protection service: 2 months FREE*
More information about the 200q20v