ECU resetting 200q20v digest
jeremyp at mindspring.com
Mon Jul 1 13:22:33 EDT 2002
I believe the idea was to EXPLICITLY erase the adaptive memory after
upgrading the car. Does pulling the Motor fuses do this?
Email: mailto:jeremyp at mindspring.com
The Solution is in the Question, not the Answer
From: 200q20v-admin at audifans.com [mailto:200q20v-admin at audifans.com] On
Behalf Of Brett Dikeman
Sent: Monday, July 01, 2002 12:02 PM
To: SuffolkD at aol.com; 200q20v at audifans.com
Subject: Re: ECU resetting 200q20v digest
At 1:54 AM -0400 7/1/02, SuffolkD at aol.com wrote:
>A bad idea?
The ECU in our cars is -very- simply, 100% reset by simply pulling the
two fuses under the red plastic double-fuse shield marked "MOTOR". 30
seconds should do it.
The proper way is to use VAG-COM or a VAG1551, since both can clear the
codes without erasing the adaptive memory.
"They that give up essential liberty to obtain temporary
safety deserve neither liberty nor safety." - Ben Franklin
200q20v mailing list
200q20v at audifans.com http://www.audifans.com/mailman/listinfo/200q20v
More information about the 200q20v