Help...wheel hubs needed for G60 conversion

Steven Hauptmann hauptmanns at MAIL.LLR.STATE.SC.US
Fri Jul 26 14:38:41 EDT 2002

Precisely. I am doing a UFO to G60 conversion. I should have been clearer.

I'm sure you are correct on the urS4 parts being the official Audi "fix",
but I think the later 5ktq and 200-10v/converted V8 and urS4 wheel hubs are
the same. A quick check of ETKA tonight will tell the tale though.

My UFO rotors are not warped and I do not have any plans for them as long as
I can get this conversion done.

I would like to get the old girl officially ON THE ROAD before I get rid of
the old parts though.

Do you know where I can get a pair of urS4 (or equivalent) wheel hubs?

Any help would be most appreciated.

Steve Hauptmann

 -----Original Message-----
From: 	Kneale Brownson [mailto:knotnook at]
Sent:	Friday, July 26, 2002 11:59 AM
To:	Steven Hauptmann
Subject:	Re: Help...wheel hubs needed for G60 conversion

I presume you're switching from UFO's?  I think the Audi-authorized
conversion was to go with the S4 front end parts,  not the 5ktq.

So is there anything left on your UFO rotors?  I'd be interested in them if
so, even if they warped some on you.

Regards, Kneale

At 11:02 AM 07/26/2002 -0400, you wrote:

>Hi all,
>I am in the middle of a suspension overhaul and a G60 conversion on my '91
>200 20v and I have overlooked something very important.
>The ~11inch rotors do not fit over the original '91 200 20v wheel hubs.
>I picked up a pair of 5000tq hubs from a junkyard but they are apparently
>the early style ('86-?) which use a different wheel bearing. I was actually
>thinking of just getting the earlier wheel bearing to make use of these
>available wheel hubs BUT, the outer cv-joint apparently changed also when
>the bearing ID was changed, so these old style hubs will not fit over the
>splines of my cv-joint.
>What I desperately need is a pair of wheel hubs which work with the ~11
>rotors AND will fit my original cv-joint splines.
>Does anyone have a pair they can part with for a reasonable price?
>I can have my brother pick them up from someone in the DC area or I will
>gladly compensate you additionally for the time and effort it will take to
>package them and drop them in the mail.
>Steve Hauptmann
>car on jack stands =(
>Columbia, SC
>200q20v mailing list
>200q20v at

More information about the 200q20v mailing list