Turbo bypass valve copper vacuum hose

TM t44tq at mindspring.com
Sun Jul 28 14:06:47 EDT 2002

Anyone have any advice on where to find that tubing and also
where to get a bender for it?

I tried my local Home Depot and even a plumbing supply place and
they didn't have any, nor did the local hardware store.


-----Original Message-----
From: 200q20v-admin at audifans.com [mailto:200q20v-admin at audifans.com] On
Behalf Of Phil Rose
Sent: Sunday, July 28, 2002 12:43 PM
To: BriceW at webtv.net
Cc: 200q20v at audifans.com
Subject: Re: Turbo bypass valve copper vacuum hose

At 3:20 AM -0500 7/28/02, BriceW at webtv.net wrote:
>George Sidman recommended that when I change my bypass valve that I use

>1/16" copper refrigerant tubing for the vacuum hose. When I do this how

>do I connect the copper tubing on each end? Chris Miller said to leave
>3 inches of the rubber tubing on each end and connect the copper tubing

>into that.

Yes? So what problem do you have with that advice? You could leave 6
inches for an easier connection.


Phil Rose				Rochester, NY USA
'91 200q	(130 Kmiles, Lago blue)
'91 200q   (57 Kmiles, Tornado red)
	mailto:pjrose at frontiernet.net

200q20v mailing list
200q20v at audifans.com http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list