Track suspension setup

TM t44tq at
Tue Jun 4 18:52:25 EDT 2002

Instead of doing this, for track use, I'd suggest getting camber plates
and adjusting the alignment either at the track or just before you go.

-0.5 for track use is nowhere near enough. I'm running -1.5 and for
autox, it isn't enough- I'd run at least -2.0 at the track.

I'm seriously considering camber plates for my car- that way I can run
-2 for track use, then go back to a sane setting (maybe -0.5 or -0.75)
for street use. I like having a little negative camber even for street
use- car turns in better.

2Bennett and Euro-Car Service both sell camber plates.


More information about the 200q20v mailing list