update on boost problems

Mike Miller mikemilr at blackfoot.net
Wed Jun 12 09:29:32 EDT 2002

Dan - along with what Ingo said - check for a crimp in that hose where it exits the IM and goes over that little bracket. Also make sure it isn't burnt under the heat shield on the passenger side of the engine.

mike miller

----- Original Message -----
From: Ingo D. Rautenberg <ingo at waratap.com>
To: Dan Simoes <dans at audifans.com>; 200q20v <200q20v at audifans.com>; SJM Auto -Technik <sjmauto at attbi.com>
Sent: Wednesday, June 12, 2002 8:11 AM
Subject: Re: update on boost problems

> Dan,
> Have you replaced the vacuum line from the bypass valve to the IM fitting?
> Good one to use is the red/brown one available at WMB dealers.  Have you had
> a chance to swap ECU's with anybody else yet to see if it may be the source
> of your unsteady boost?  How about rechecking the plugs for proper fuel mix?
> See:  http://www.motocross.com/motoprof/moto/mcycle/plug2/plug2.htm

More information about the 200q20v mailing list