Chris Covington malth at
Tue May 14 20:04:57 EDT 2002

Next thing to do is check the screw that holds the shifter linkage down on
top of the tranny (you can get to it from under the hood) and make sure
that it hasn't come loose - if so retiten and apply locktite.  If I had
done that I would've avoided losing 1,3,5 gears about 50 miles away from

'91 200q20v

On Tue, 14 May 2002 Zoot531 at wrote:

> Listers,
> Thanks once again for the impeccable advice.  Turns out the fusible link wa=
> s the culprit and after a minor fabrication session (hammering the beejeezu=
> s out of it to fit under the screws) in the home depot parking lot, a piece=
>  of 4 gauge copper wire fit the bill exactly, that is until i can replace i=
> t with the actual part.
> Once again, this list has proven invaluable!
> --
> Adam Chinchiolo
> '91 200q20v . . . sans fever
> _______________________________________________
> 200q20v mailing list
> 200q20v at

More information about the 200q20v mailing list