update on problems/codes
brett at cloud9.net
Tue May 21 19:04:54 EDT 2002
At 5:53 PM -0400 5/21/02, Phil Rose wrote:
>At 9:28 PM +0100 5/21/02, Johnny Alpha wrote:
>>Just one further thing, if you are going to test to 20psi, disconnect
>>the MAP sensor first to protect from damage!
>You mean "MAF" sensor?
Manifold Air Pressure.
He's right...I have no idea what the design limit on the sensor is,
but exceeding 2 Bar absolute(14psi above atmosphere) would not be
very smart at all unless the ECU was disconnected.
Personally, I don't test above 1.8bar indicated via the dash; no
fuss, no muss...and usually, if you've got a leak, it shows up way
before then :-)
PS:might want to cap the dipstick tube with a stopper or something,
or you'll launch the dipstick.
"They that give up essential liberty to obtain temporary
safety deserve neither liberty nor safety." - Ben Franklin
More information about the 200q20v