Bucking under acceleration

Richard Tanimura Richard at Tanimuras.com
Thu Nov 7 08:00:36 EST 2002


I installed a MAF on my other car. I then got starting problems on a car
that otherwise runs perfectly. Then I discovered that the electrical
connector was loose. I push it tight and it ran like a charm. I You may have
inadvertently jostled the connector. Check it.


-----Original Message-----
From: 200q20v-admin at audifans.com [mailto:200q20v-admin at audifans.com]On
Behalf Of Bernie Benz
Sent: den 7 november 2002 04:21
To: PeterBergin at aol.com
Cc: 200q20V mailing list
Subject: Re: Bucking under acceleration

> From: PeterBergin at aol.com
> In a message dated 11/06/2002 5:01:03 PM Central Standard Time,
> john_mallick at iat.utexas.edu writes:
>> http://www.sjmautotechnik.com/20vtime.html
> Thanks for the link, It appears that if the sensor fails, the car will not
> start, however the Bentley makes a reference to missing with a bad sensor.
> still suspect the Air Mass Meter, as the failure occurred just after
> and oiling my K&N.  I just hate to pop $340 for a new one without being
Trade in the K&N.  Some sucker may pay a few bucks for it, not me.

> Thanks, Pete

200q20v mailing list
200q20v at audifans.com

More information about the 200q20v mailing list