Clean the MAss Air flow Wire K & N Filter oil

davidb01 davidb01 at
Thu Nov 7 06:17:33 EST 2002

Frobbing?...  I'm not familiar with that one  (nor is my spell check or
thesaurus)  ;-)


 -----Original Message-----
From: 	200q20v-admin at [mailto:200q20v-admin at]  On
Behalf Of Brett Dikeman
Sent:	Wednesday, November 06, 2002 11:13 PM
To:	SuffolkD at; 200q20v at
Cc:	PeterBergin at
Subject:	Re: Clean the MAss Air flow Wire K & N Filter oil

At 11:47 PM -0500 11/6/02, SuffolkD at wrote:
>Can you clean the wire?

Yes and no.  Some comes off, but since the wire is cleaned(courtesy
being heated to white-hot) every time the engine is shut off, pretty
much anything that isn't vaporized gets nicely bonded to the wire,
which I think is glass-coated platinum or bare platinum.  The wire is
very thin and you don't want to go frobbing it.

I have a dead MAF sitting around somewhere from a lister who sent it
my way, in hopes of maybe being able to clean it.  Didn't work.  I
got a little residue off the wire, but not nearly all of it.

All the contamination was from the -engine- side, if I remember
correctly.  We never figured it out.  There was a ton of oil built up
on the screen...again, engine side and only the side facing the turbo.

"They that give up essential liberty to obtain temporary
safety deserve neither liberty nor safety." - Ben Franklin
200q20v mailing list
200q20v at

More information about the 200q20v mailing list