dak at rochester.rr.com
Fri Nov 22 08:54:12 EST 2002
I know on my 87 5KTQ, there was an easy way to initiate output tests on
the ECU. I could actuate the fuel pump, cold start valve, etc.
I just looked at my bently under fuel injection and didn't see anything
like that. You might check SJM's site, or someone else will probably
respond about this...
On 11/22/2002 1:44 AM, Jeremiah Curry wrote:
> Hi all,
> This morning the 200 didn't start. More accurately it started for about 2
> seconds then died. It won't start again. the engine turns over, but no
> start. I was thinking maybe fuel pump. I checked the #13 fuse and that was
> fine. What is the easiest way to narrow down the problem? I can't here the
> pump and thought I could before, but I'm not sure.
> Thanks in advance for any help
> '91 Audi 200 20v (won"t start)
> '73 International Scout (won't stop)
> 200q20v mailing list
> 200q20v at audifans.com
More information about the 200q20v