Keyless Entry Install

Bernie Benz b.m.benz at
Tue Oct 1 07:49:15 EDT 2002

I removed that system installed by PO on my 90Q-20V.  Piece of junk, and a
botched wiring job took more time to repair than the correct reinstall.
Used the second channel to roll down the driver's window when unlocked.


> From: jim catterson <termite at>
> Date: Tue, 1 Oct 2002 05:22:07 -0700 (PDT)
> To: 200q20v at
> Subject: Re: Keyless Entry Install
> --- Bernie Benz <b.m.benz at> wrote:
>> The RKE should go in the driver's footwell.  That's where you tap all
>> the
>> connections. You should have bought a RKE with the relays built into
>> it.
> i guess that i took a different approach here than everyone else.  i
> used an actuator piggybacked on the lock rod in the driver's door.  hit
> keyless entry and it activates the actuator,  pulling the rod down and
> locking the doors....
> =====
> cheers
> jim catterson

More information about the 200q20v mailing list