vegener at post7.tele.dk
Thu Oct 3 10:05:46 EDT 2002
I am not a guru on that an have only planned to do something.
Not tryed it
But got the opinion from several years on the list, that for the
200 the rear should be left as it is and reinforcing front with
stronger swaybar, strutbrace and camber plates for track use, was the way to go.
----- Original Message -----
From: "Bernie Benz" <b.m.benz at prodigy.net>
To: "Claus Vegener" <vegener at post7.tele.dk>; "Eyvind Spangen" <eyvind.spangen at c2i.net>
Cc: "200q20V mailing list" <200q20v at audifans.com>
Sent: Thursday, October 03, 2002 4:45 AM
Subject: Re: Rear stabilizer
> Beg to differ, Claus,
> If, as you declare, "the 200 chassis is so flexible, that it should not have
> a rear stabilizer", adding anti roll torque in the rear should/would make no
> difference, inasmuch as chassis deflection would follow the front restricted
> body roll anyway and there could/would be no rear wheel lift, with or
> without. Such is not the case. Rear anti roll torque can only improve the
> car's understeer tendicies, which is why IMO it was added in small doses
> both the '92 S4 and the V8. The S4 rear anti roll system has been added to
> the 200 chassis, with posted mod descriotion and positive results.
> Go for it, Eyvind and post your results.
> > From: "Claus Vegener" <vegener at post7.tele.dk>
> > Date: Thu, 3 Oct 2002 00:19:01 +0200
> > To: "Eyvind Spangen" <eyvind.spangen at c2i.net>, <200q20v at audifans.com>
> > Subject: Re: Rear stabilizer
> > Wisedom from the list have former said -
> > that the 200 chassis is so flexibel, that it should not have a
> > rear stabilizer. A rear stabilizer tend to lift the innermost
> > backwheel of the ground, so you will have a rear slip.
> > Stronger springs and shocks should be the way to go -
> > Claus
> > 90 200q20V Avant
> > 83 Urq WR
> > ----- Original Message -----
> > From: "Eyvind Spangen" <eyvind.spangen at c2i.net>
> > To: <200q20v at audifans.com>
> > Sent: Wednesday, October 02, 2002 11:51 PM
> > Subject: Rear stabilizer
> >> I have a rear stabilizer from a '93 V8 here, and I'm thinking about
> >> installing it in my 200q20v. Do you think it will make a difference?
> >> --
> >> E. Spangen
> >> '90 Audi 200TQ20v
> 200q20v mailing list
> 200q20v at audifans.com
More information about the 200q20v