OK System Check
thequattroking at yahoo.com
Wed Oct 9 17:46:45 EDT 2002
Nope. you don't have to remove the wheel. Takes me about 5 minutes to pull
the gauge cluster.
Enough Audis to give plenty of headaches.
Parting: 1972 Mercedes Benz 280 SE 4.5
> One more question - did you have to remove the steering wheel to get the
> dash out? Someone told me you had to but Chris's instructions didn't
> mention it.
> your post was just fine!
> I get both bogus error conditions and hieroglpyphics. Sometimes my
> display actually shows the radio station! I'm sure that touching up
> solder joints will fix all of it.
> This is my first attempt at posting to the list so please let me know if I
> use poor etiquette.
> '91 200 20V Wagon - OK system gives intermittent false oil and brake errors.
> I know the brakes are good (just replaced UFO's/pads and tied sensors
> closed) and watch the gages for oil pressure and temp. It's bugging me! I
> read suggestions from Chris Miller's page of touching up the solder joints
> on the main board however my symptoms are slightly different ( I don't get
> the hieroglyphics) . Is it the same solution? Any words of wisdom prior to
More information about the 200q20v