Bernie Benz b.m.benz at prodigy.net
Sun Sep 1 14:57:05 EDT 2002


Your modified camber plate moves the upper strut mounting in the direction
of more positive (or negative, if so positioned) camber by 4mm, 5/32" which
is all that is possible without the spring perch interfering with the strut

My comment is that I don't believe that the effort involved in incorporating
your mod on the camber plates is worth the effort.  I have, in a much easier
fashion, accomplished your result by dropping the strut from the tower a few
inches and elongating the camber plate mounting holes in the tower by the
4mm. and adding larger dia. washers under the nuts.

How to skin a cat always has many options.


> From: Igor Kessel <igor at s-cars.org>
> Date: Fri, 30 Aug 2002 19:57:56 -0400
> To: Audi S-list <s-car-list at audifans.com>
> Cc: Audi 200q20v list <200q20v at audifans.com>, Audi Q-list
> <quattro at audifans.com>
> Subject: IgorCamberPlate.pdf is online
> Folks,
> it appears that some of you have not seen my previous post. Here it is
> again.
>> The file is now online at:
>> http://www.s-cars.org/listpics/IgorCamberPlate.pdf
> --
> Igor Kessel
> two turbo quattros
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list