FW: Production Years?

DAK dak at rochester.rr.com
Thu Aug 28 15:40:05 EDT 2003

The '91 200q20v had the "sport" body. It does run lower than the other
type 44s I've seen. I know that some of the front suspension parts are
specific to that model. Unless someone has a complete list of unique
parts, I'd just check everything before assuming it would work. One
example I can think of is the front upper strut mount The standard part
is pressed steel, the '91 part is a cast piece.


Chris Payne wrote:
> Wait a minute, I thought the Chassis were identical?  I mean, parts can be interchanged like subframes, struts towers, bushings, etc.?
> Chris
> --- "Bernstein, Jeff" <Jeff.Bernstein at pneumaticscale.com> wrote:
>>>The turbo arrangement is far superior on the '91 model as compared to the
>>>'90 model and in my opinion this makes the turbos in the '91 last a lot
>>>longer.  The flared fenders not only allow bigger tires (much needed) but
>>>also look much classier and modern than the straight fenders.  The
>>>suspension and chassis are much beefier on the '91 model also.  The '90
>>>model is very nice but the '91 is far superior in every aspect and
>>>definitely worth waiting for.
>>>Jeff Bernstein
>>>Canton, Ohio
>>200q20v mailing list
>>200q20v at audifans.com
> _____________________________________________________________
> Do you drive an Audi and Love it ?
> http://www.AudiFan.com
> 100s of FREE email addresses --->
> http://www.UltimateEmail.com
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list