Crankcase Breather Hose

Bernie Benz b.benz at
Tue Dec 9 17:59:20 EST 2003

I "rebuilt" mine 6 mo or so ago, posted it to the list and started another
war with the fat wallet guys, taking the usual heat, but it was a freebe.

Two pieces of rad hose from my junk box, an ell that just fit over the block
port and another ell that hust fit inside the first ell, and cut off the
good part of the old hose just behind the block, which just fit into the 2nd
ell.  Si caulk it all together.  These hoses are fabric reinforced so the
added stiffness prevents collapse, an improvement over the original junk.
Best part is that I reduced the size of my rad and heater hose junk box a

Search the archives, should be there somewhere.


> From: Dan Cordon <cord4530 at>
> Date: Tue, 09 Dec 2003 14:05:51 -0800
> To: 200 List <200q20v at>
> Subject: Crankcase Breather Hose
> Since this was just mentioned, my 91 200tq breather hose also has a hole
> in it where it has rubbed on the coolant line for some time. Scott and
> Rod said they weren't able to get only item. However, when
> I've called a few dealers, they can't seem to find the part on the
> computer at all.
> Anyone know the part# for the breather hose?
> Also, there was some talk about repairing the hose. I haven't found any
> write-up's on this though. Any BTDT?
> --
> Dan Cordon
> Mechanical Engineer - Engine Research Facility
> University of Idaho
> _______________________________________________
> 200q20v mailing list
> 200q20v at

More information about the 200q20v mailing list