rad. fan question
alancordeiro at comcast.net
Mon Feb 24 18:27:00 EST 2003
Did you have the polarity right? the BROWN lead is Ground if
I remember right, the positive may be BLACK. What's even worse is that
the fusible link is in the Ground return..
I am not saying you DID do it wrong, it's just that it's so easy to get
hooking up jumper leads to test on the fan,
> Looked at SJM's site, Bentley... go out the garage and attempt to
> energize the fan motor. fan spins when I turn it... disconnect wires,
> use jumper cables... it cranks right up! I let it stop and do it a
> couple of more times to be sure it is working normally. So, I reconnect
> the ground and try again... the fusible link smokes! I try again, more
> smoke.. OK, something strange. I put a meter lead on the link, but it
> falls apart with very little pressure.
More information about the 200q20v