knotnook at traverse.com
Wed Jan 15 14:43:44 EST 2003
That stuff looks like the fuel lines with braided cloth coverings. When I
redid my 200q20v pump, the original line was a smooth plastic-looking tube,
as was the replacement I bought because of the different attachment
arrangement with the newer, smaller pumps. Maybe my "old" pump was one
that had been replaced previously.
At 02:19 PM 01/15/2003 -0500, Peter Schulz wrote:
>Some pics of the fuel pump/vent hoses that I replaced in the indigo wagon,
>along with a closeup view of the deteriorated hose ends...
>At 05:30 PM 1/14/2003 +0000, you wrote:
> >Some digital pictures would be greatly appreciated before I start
> rooting around in therer....
> >JOBE TICHY
> >>From: Peter Schulz
> >>To: Phil and Judy Rose
> >>CC: Kneale Brownson ,"Jobe Tichy" , 200q20v at audifans.com
> >>Subject: Re: Hard Start...Still
> >>Date: Mon, 14 Jan 2002 09:17:51 -0500
> >>Another potential issue is the loss of fuel pressure due to venting of
> fumes through the rubber hoses around the tank....
> >>These hoses are similar to the braided vacuum hoses in the engine
> >>After replacing the approximate total 12 inches of hoses around the
> fuel pump which had badly deteriorated ends, my hard starting issue
> improved considerably.
> >>I have some digital pix on my home machine, and will try to post them soon.
>1991 200 20v TQW indigo mica
>1991 200 20v TQW titanium grey
>Chelmsford, MA USA
>peschulz at cisco.com
>200q20v mailing list
>200q20v at audifans.com
More information about the 200q20v