dbpulvino at hotmail.com
Mon Jul 21 10:40:57 EDT 2003
Pretty close..."don't buy new if you can fix it yourself."
So pull the hyd pump is the recomendation? I read through Chris's page and
the write ups on there recomended also removing the wheel well liner. Has
everybody had to do this or is that optional in case you wanted to remove
the fan shroud?
And to think I just had the hyd. pump out about a month ago for a refurb.
Did you disconnect all the pentosin lines to remve the pump?
>I'm curious too-- guessing that the last part is "if you can fix it your
>----- Original Message -----
>From: "Chuck Pierce" <cpcycle at earthlink.net>
>To: "Derek Pulvino" <dbpulvino at hotmail.com>
>Cc: <200q20v at audifans.com>
>Sent: Sunday, July 20, 2003 5:11 PM
>Subject: Re: Radiator Removal
> > --
> > [ Picked text/plain from multipart/alternative ]
> > Hello Derek
> > First what is "dbnifycfiys" ?
> > I pulled the hydraulic pump to give me more room to pull the radiator
> > out ( this was a recommendation from Scott M. ) made life really easy. I
> > pulled the rad. with the shroud. I believe that there are 4-5 bolts
> > holding the shroud on.
> > Chuck
> > 91 200tq 20v avant
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
More information about the 200q20v