after run relay
Mike Del Tergo
mdeltergo at hotmail.com
Sat Jun 7 01:19:36 EDT 2003
got it, my mistake. You didn't mention miles. I've started replacing all
coolant temp sensors/tstat at once, and thereby coolant only once! .
2 in the manifold, one in the rear head and the rad. Hopefully good for a
few years any way.
>Hi Mike, that 2 pin sensor in front of the MFTS is the first thing I
>replaced. However, I did what had been suggested, and with ignition off.,
>connected the 2 wires together, bypassing the sensor, which turned on the
>fan. I clocked the running time of the fan, and sure enough, at exactly 10
>minutes, the relay kicked out and turned off the fan. Hopefully that is the
>ultimate test for the relay. I'm going to call it good.
>----- Original Message -----
>From: "Mike Del Tergo" <mdeltergo at hotmail.com>
>To: <reesisright at netzero.net>
>Cc: <200q20v at audifans.com>
>Sent: Friday, June 06, 2003 10:55 AM
>Subject: Re: after run relay
> > Reese,
> > Your relay may still be fine. The 3/4 pin MFTS sender is not the one
> > operates the after run fan/pump. It is the 2 pin sender that resides in
> > coolant manifold about 3/4 inches more towards the front of the car.
> > $20 at most places.
> > Mike
> > From: "reesisright" <>
> > Subject: Re: after run relay
> > Date: Thu, 5 Jun 2003 13:26:32 -0700
> > I recently changed the sensor by the MFTS, and still no after-run.Which
> > why I'm looking for the relay.
> > Rees.
> > _________________________________________________________________
> > MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
> > http://join.msn.com/?page=features/virus
MSN 8 with e-mail virus protection service: 2 months FREE*
More information about the 200q20v