Alignment: Impossible with H&R springs?

motogo1 motogo1 at
Tue Jun 10 22:28:07 EDT 2003

I'd just like to chime in with the fact that I'm running different
shocks/springs and my Avant handles just fine, IMO of course. Have H&R 29800
(200 spec in front) 29921 (V8) in rear for towing and heavy loads. Koni
sports in front, Bilstein HD in back. Felt great towing a heavy utility and
dirt bike this weekend. I don't track the car, so no experience there, and
of course YMMV. Oh yes, and I just slotted my camber adjustment plates to
arrive at about 1 degree negative camber. Just in spec, I agree and I
probably won't get max tire wear, but I don't think it will be too bad

Gary Martin
94 UrS4
91 200 TQA

----- Original Message -----
From: "TM" <t44tq at>
Subject: RE: Alignment: Impossible with H&R springs?

> Don't run different shocks/springs in the rear- that might bite you if
> you
> have a mismatched set and experience strange handling.
> Taka
> _______________________________________________
> 200q20v mailing list
> 200q20v at

More information about the 200q20v mailing list