Subject: WAS RE: Electrical Question 1.4 bar boost

SuffolkD at SuffolkD at
Mon Jun 16 03:25:48 EDT 2003

[ Picked text/plain from multipart/alternative ]

Similar symptom:
So far its the by pass valve.
Check it out
-Scott in BOSTON

In a message dated 6/15/03 12:12:21 PM Eastern Daylight Time,
200q20v-request at writes:

> Thank You!
> It is indeed an altitude sensor, at least it looks like the part shown in
> the Bentley's on 25.91. After reading the symptoms that a failing sensor
> emits, such as low maximun boost, my sensor is most likely dead. I reach 1.4
> on the gage, but it does
> not hold. I have not seen any fault code or check engine lights, but will
> try the voltage tests as described in Bentley.
> Thanks again!

More information about the 200q20v mailing list