brakes fine- now tranny whine?

Phil Rose pjrose at
Wed Mar 12 18:16:03 EST 2003

At 8:49 PM -0500 3/11/03, Brett Dikeman wrote:
>So, what do I do?  Loosen up the fill valve, then drain the tranny
>and see how much comes out?  What's the second drain plug(nicely
>inaccessible without the exhaust removed) for?  Is it necessary to
undo that plug as well as the drain up front to get everything out

Remove the filler (upper) plug--located just aft of the driver's-side
drive shaft--and insert a finger (of your choice). The proper fill
level is within a few millimeters of the filler opening, but it's
common to fill  right up to the max.  A level that's more than 1/2"
or so below the opening is good evidence of a leaking oil seal.


Phil Rose				Rochester, NY USA
'91 200q	(135 Kmiles, Lago blue)
'91 200q   (58 Kmiles, Tornado red)
	mailto:pjrose at

More information about the 200q20v mailing list