Metal distributor gear
brogers at terrix.com
Mon Mar 24 10:50:46 EST 2003
I have my engine on a stand--very disassembled--so we just bent that little
bugger out of the way. So can that bracket be replaced with one that's
missing the anti-tamper cover? They all look the same....
----- Original Message -----
From: "Mihnea Cotet" <mik at info.fundp.ac.be>
To: "Brian Link" <BrianL at starsys.com>; <200q20v at audifans.com>
Cc: <brogers at terrix.com>
Sent: Monday, March 24, 2003 10:38 AM
Subject: Re: Metal distributor gear
> Hammer and chisel, BTDT and it's a lot easier than dremelling that sucker
> At 10:23 24/03/2003 -0700, Brian Link wrote:
> >I helped my friend do his. It was 1.5 - 2 hours. Pull off the cap,
> >mark the rotor position on the distributor. Pull it swap gears
> >reinstall. If you are doing yours on an engine stand it will be very
> >I want to know what the best way to remove the anti-tamper cover is.
> >Anyone? Cause I'm going to do mine in a couple of weeks.
> >This is a multi-part message in MIME format.
> >[ Picked text/plain from multipart/alternative ]
> >Thanks to those who replied...but nobody answered my question. My
> > is this:
> >How tough is it to install? Is it a 1 hour job? 6 hour? Is it worth
> >the t=
> >ime and hassle vs plunking down the extra cash and just buying a new
> >I'm not looking for a set of instructions or a gear or anything
> >else--just =
> >want to know how tough the procedure is. If somebody who has installed
> > gear can take a second and let me know I'd be grateful.
> >Thanks very much-
> >200q20v mailing list
> >200q20v at audifans.com
More information about the 200q20v