Heater Evaporator Box Parts

Kneale Brownson knotnook at traverse.com
Fri Apr 23 08:26:21 EDT 2004

At 01:18 AM 4/23/2004 -0500, Brice Warnick wrote:

>Snip all the parts being replaced<

Have you considered the hose clamps?  When I removed all my heater system
soft parts,  along with replacing the crankcase vacuum system and both
radiators, I found half the OEM hose clamps very difficult to open/close
because the screw part had rusted.   Two even had to have the stainless
bands cut.   I decided to replace them all with clamps that had stainless
screws as well as the bands.

More information about the 200q20v mailing list