IA Stage III+ hardware?
patrick.anderson1 at comcast.net
Sun Jan 4 14:49:42 EST 2004
I would recommend that you get the RS2 exhaust manifold if you are going to
get the III+ software. It will prevent you from overheating the exhaust
valves. If you are sticking with the stock turbo you should probably only
get the stage III chip. The III+ may push the stock turbo too its absolute
limits, possibly resulting in failure. But if you can plunk down the $$$ the
III+, E.M., and RS2 turbo will leave you with a huge grin and a very heavy
foot. And you can run away from new S4's with ease, speaking from experience
here. Give Ned at Intended Acceleraction a call and he can set you up with
everything you need. I have always found him to be very helpful.
----- Original Message -----
From: <auditude at cox.net>
To: <quattro at audifans.com>; <200q20v at audifans.com>
Sent: Thursday, January 01, 2004 10:36 PM
Subject: IA Stage III+ hardware?
> Happy New Year!
> What hardware is required to properly run Ned's Stage III+ chipset? I
understand this stage
> incorporates a 3.0 bar pressure transducer in the 3B application, correct?
> 200q20v mailing list
> 200q20v at audifans.com
More information about the 200q20v