Calibrating torque wrenches, was dist. rattle
b.benz at charter.net
Tue Jan 27 22:47:59 EST 2004
> From: auditude at cox.net
> Is there a DIY calibration, versus calibration checking?
What's the diff, Ken? A check or calibration is only a repeatability check
on the previous calibration. I do it before every use (once every 2 or 3
years, if I need the wrench and can find it). DYI is pretty simple.
Torque = force x the quadature lever arm length.
More information about the 200q20v