Poor warm restart idle and more
knotnook at traverse.com
Fri Jul 2 14:22:03 EDT 2004
Last set of G60 pads I bought had the holes on both inner and outer for the
retainer screws used on the outers.
At 09:00 AM 7/2/2004 -0700, Bernie Benz wrote:
>> From: Kneale Brownson <knotnook at traverse.com>
>> At 06:25 AM 7/2/2004 -0700, Bernie Benz wrote:
>>> What's wrong with your UFO rotors? DFI if IAB! My only complaint
>>> UFO design is that the pads are not interchangeable, inside to outside.
>>> bad for maximizing pad life! Will FWD my UFO pad info, Paul.
>> Shouldn't pad wear be about the same inside to outside if you have the
>> caliper in good working order?
>Should be about the same, but is less even on my UFOs than on the G60s, even
>with guide pins well lubed. G60 pads can be reversed if you don't use the
>unnecessary retaining spring supplied on some of the outboard pads.
More information about the 200q20v