Heater Blower Motor squealing.

Bernie Benz b.benz at charter.net
Wed Sep 8 15:51:08 EDT 2004

You didn't need the 2X4, George!  Why didn't you just hang the coat hangers
off that 50 lb. solid bar you have running between strut rods?


> From: George Sidman <sidman at montereynet.net>
> Date: Wed, 08 Sep 2004 08:55:31 -0700
> To: 200q20v at audifans.com
> Subject: Re: Heater Blower Motor squealing.
> Steak knife not required.
> Prompted by an uncommented picture in Bentley, I had a brief
> attack of intelligence and simply placed a four foot long 2x4
> across the shock towers, hooked two wire coat hangers on each
> side of the blower assembly, and by lifting up on one end the
> whole assembly simply pops loose. Piece o'cake. Something about a
> lever long enough, etc.
> -- 
> George Sidman, President
> Monterey Network Center, Inc.
> sidman at montereynet.net
> 9701 Blue Larkspur Lane
> Monterey, CA  93940
> 831 373-0145
> _______________________________________________
> 200q20v mailing list  http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list