91 200 20v No Start :(

Kneale Brownson knotnook at traverse.com
Fri Sep 24 23:20:52 EDT 2004

That line on my 200q20v was all corroded, almost to the point of the
connector breaking off.  So I started skinning back the shielding.  The
wires were all green-crusted, even inside the insulation for almost as far
as I could get to without taking off the bumper cover, passenger headlight
and intercooler assembly.  That's where I crimp-spliced a new piece of 12
gauge wire something like18-20 inches long.

At 08:53 PM 9/24/2004 -0600, Jeremiah Curry wrote:
>Ok, I investigated and the big bolt wire has voltage all of the time, the
>red line only has voltage when the key is tured to the start position, but
>if I use pliers to bridge between the two, the car starts.  What do you guys
>think? maybe not enough voltage on the red line? it is somewhat frayed, but
>still attached.

More information about the 200q20v mailing list