Front Strut insert replacement
irautenberg at comcast.net
Sat Apr 16 21:36:41 EDT 2005
I believe he is refering to the strut cartridge cap, in which case a
suitable Channel Lock or chain wrench can be used instead.
----- Original Message -----
From: "Bernie Benz" <b.benz at charter.net>
To: <Tdehoff at aol.com>
Cc: "200q20V mailing list" <200q20v at audifans.com>
Sent: Saturday, April 16, 2005 8:58 PM
Subject: Re: Front Strut insert replacement
> An impact wrench will spin the strut rod nut right off. If that's what
> are poorly describing as your problem.
> > From: Tdehoff at aol.com
> > Date: Sat, 16 Apr 2005 20:36:45 EDT
> > To: 200q20v at audifans.com
> > Subject: Front Strut insert replacement
> > I was going to try and replace the front sturt inserts today. Bentley
> > showed it being done without compressing springs and while car stood on
> > ground.
> > However I ran into a problem. There is a screw on cap that requires a
> > special
> > tool #2069, Monroe called their tool K13. Anyone know where I can find
> > a tool or is there another way to unscrew the cap? I know that you
> > will have the right tip for me.
> > Tom
> > Iowa
> > 91 200Q 142K
> > 86 VW synchro 306K
> > _______________________________________________
> > 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.9.13 - Release Date: 4/16/2005
More information about the 200q20v