vwaudiporschefan at yahoo.com
Tue Aug 30 10:11:54 EDT 2005
No the timing belt being off 2 teeth would not adversly effect the lifters. They are oil pressure fed and are simply depressed by the lobes on the camshaft as it rotates.
However, the timing of when the valves open with respect to the crankshaft position (and therefore piston position) HAS changed. I would be more inclined to think that what you are hearing might be the valves and pistons doing a little tap dancing.
Lagnese" <jlagnese at massed.net> wrote:
Could lifters be damaged by the timing belt being off 2 teeth?
This is the car, my 91 200QT with 59,000 miles, that had the timing belt
changed. It had lousy power, hard to start when hot, and is now making
I checked the timing marks myself. I set the TDC O on the flywheel and the
timing mark on the outside of the timing belt wheel was off 2 teeth. I then
went to the garage and showed them this myself. They will take it back in
200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
Start your day with Yahoo! - make it your home page
More information about the 200q20v