A couple alignment questions

Bernie Benz b.benz at charter.net
Mon Dec 26 23:19:20 EST 2005


1* degree = 60' minutes = 3600" seconds.
For your stated usage, Front and Rear I use:
Zero to -0.25* camber, both sides being made identical.
Total toe, centered on chassis: Zero to +0.5*


> From: Rbade12 at aol.com
> Date: Wed, 21 Dec 2005 13:21:25 EST
> To: 200q20v at audifans.com
> Subject: A couple alignment questions
> I'm taking the car [91 200q20v] in for an alignment Friday and  would like
> your opinion[s] for alignment specs. I have installed H&R  springs with Koni
> shocks and I'm aware I most likely won't see front camber  numbers near
> normal, 
> but pretend I can get there, what numbers do you folks like  for plain 'ol
> driving with an occasional spirited backroads romp? I'm running OE  wheels.
> I'm looking at alignment specs in my Bentley manual, what form of
> measurement are they talking? Fro example, total toe front +10'  +10',-5',  is
> that 
> mm's? And what the heck is -1* 40' +/-30' [my computer doesn't have a  small
> "degrees" circle, so I used *]under toe angle difference, a combination of
> degrees 
> and mm's? I feel a bit stupid for not knowing!
> Thank you and Happy Holidays!
> Bob
> _______________________________________________
> 200q20v mailing list  http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list