Strut tower rip or stress fracture REVISITED 200q20v
pcschulz at comcast.net
Thu Feb 24 08:56:25 EST 2005
There's a write up with pictures in the Winter 2004 Quattro Quarterly: p
75, "How to Repair - Modifications That Make a Difference" that discusses
added this mod to the C4 Chassis, written by Brent Henry.
It mentions the same part numbers, but also the offset Brake Fluid
reservoir that is needed, because the cross bar will interfere with the
stock one. That pn is 8E0 611 301, according to the article.
At 01:34 PM 2/23/2005, SuffolkD at aol.com wrote:
>Regarding the stress fracture or tear, Mike S has found these items which I
>believe may help stiffen up the front spring towers in a 200 type 44. our
>actual focus was the 200 20V.
>A ur-S4 Strut tower brace (Brackets) found for 4A0 (type) Section 8 type 05
>scrolled past the last item number listed in the parts list. 1992 - 1995.5
>in the 100 section of the family album.
>4A0 805 635 LEFT brace
>4A0 805 636 RIGHT brace
>Brace bar from Audi
>4A0 805 645A
>anyone with dealer connections figure out a price?
>I'm going to try this in the Spring before track days.
>Its seemingly a bolt on / slight mod affair (maybe new MC reseviour)
>but WE HAVE NO BTDT YET............. (Caution)
>-Scott by BOSTON
>In a message dated 1/27/2005 12:37:43 PM Eastern Standard Time,
>200q20v-request at audifans.com writes:
1991 200 20v Q Avant Titan Grey
1991 200 20v Q Avant Indigo Mica
1991 90 20v Q Red
1990 CQ silver (awaiting S2 engine transplant)
Chelmsford Ma, USA
More information about the 200q20v