Clutch issues

PeterBergin at PeterBergin at
Fri Jan 28 13:48:12 EST 2005

Shifting seams a bit notchy, but not considerably different, perhaps a bit 
sloppy.  The shop does not have a pressure bleeder, however they pumped with the 
pedal about two pints through it.  When the tranny was out during the 
original clutch job, the chrome piece of the linkage had play in it.  This was fixed 
by peening the rivet end tight to the linkage.  That made a noticable 
tightning in the shifter.


More information about the 200q20v mailing list