cooling system

Brandon Rogers brogers at
Tue Mar 29 10:50:35 EST 2005

well that is what I had always thought....but was then told (by someone who 
I figured knew more than I) it entered the head from the WM....

so which way _does_ it go?

----- Original Message ----- 
From: "Henry A Harper III" <hah at>
To: <200q20V at>
Sent: Tuesday, March 29, 2005 8:45 AM
Subject: RE: cooling system

> It sounds like you are explaining why the coolant comes *out* of the 
> little
> manifold from the head past the MFTS and then into the radiator, doesn't 
> it?
> :)
> Henry
>> Guys-
>> stupid questions here-
>> so the water flows up the radiator, right.  Then out the top into
>> the upper rad hose and into the manifold.
>> If this is wrong, stop me right here...
>> And if the water temp gauge gets its signal from the MFTS, which
>> is in the water manifold, how is this an accurate reading on head
>> temp?  Isn't it more likely a reading of the water temp after
>> going through the rad and before the head?.  Or does the manifold
>> absorb enough heat from the head so that it is s a good
>> reflection of head temp.....?
> _______________________________________________
> 200q20v mailing list 

More information about the 200q20v mailing list