91 200q20v, c-arm bushing replacement

Ingo Rautenberg irautenberg at comcast.net
Fri May 6 22:20:58 EDT 2005


Not exactly sure what you're saying.  In any case, if you are plnning on
replacing the inner control arm bushing, you might find it easier and more
worthwhile to replace the whole control arm --as it comes with the bushing
already installed-- plus the ball joint, which can not be purchased
separately and which is likely on its way out.  You can buy the complete
control arm for ~$100-150 from most parts places (but make sure you get the
one with the 19mm balljoint).  As to the sway bar bushing -- if you mean the
inner ones in front of the motor --  IME, this is a dealer-only part.


----- Original Message ----- 
From: <Rbade12 at aol.com>
To: <200q20v at audifans.com>
Sent: Friday, May 06, 2005 10:40 AM
Subject: 91 200q20v, c-arm bushing replacement

> I'm planning on replacing my front c-arm bushing. I was wondering if you
> folks had any tips/advice. Is there an aftermarket sway bar bushing
available or
> should I stick to OE?
> Thank you!    Bob
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.11.5 - Release Date: 5/4/2005

More information about the 200q20v mailing list