PS PUmp rebuild?

Schaible, David David.Schaible at
Mon May 9 09:43:24 EDT 2005

I pulled the pump and repaired just the leak only to have one of the
caps start leaking 2 months later.  Bentley has full details of rebuild,
I used the blau kit and it is still holding, you probably will need an
impact tool and super wide blade screw driver, they say modify a drag
ling socket, I had a big beefy socket flat blade that worked w/o
grinding.  If it is definitely just a cap I might just do that since
disassembling the pump to get to the shaft seal is more involved.  Have

David Schaible

JRS Pharma LP
2981 Rte 22
Patterson, NY 12563

-----Original Message-----
From: Bernie Benz [mailto:b.benz at] 
Sent: Monday, May 09, 2005 9:08 AM
To: PeterBergin at
Cc: 200q20V mailing list
Subject: Re: PS PUmp rebuild?

Just the leak.


> From: PeterBergin at
> Date: Sun, 8 May 2005 18:59:36 EDT
> To: 200q20v at
> Subject: PS PUmp rebuild?
> HI guys, I have been nursing a small leak in my PS pump for about 20k
> Lucas stop leak.  The leak is from underneath the pump, not the hoses
> pulley 
> seal.  I have an O-ring/seal kit from Blau and two cans of Green Gold,
but no
> instructions.
> I somewhat remember ancient posts on leaky O-rings from under the caps
of the
> pump.  One of them appears to be the leak (which is now massive).  So
I plan
> on doing this tomorrow.  Any one care to walk me through it?  Do I
need to do
> a full pump rebuild or just the O-rings under the caps?
> Thanks, 
> Pete 91 Avant 

200q20v mailing list

This e-mail has been scanned by MCI Message Labs Anti-Spam and
Anti-Virus Managed Email Content Service.


This e-mail has been scanned for viruses by a Managed Email Content Service.

More information about the 200q20v mailing list