re, Turbo after run pump
benswann at comcast.net
Fri Sep 16 11:47:16 EDT 2005
Bypass it for now. Use 5/8" barbed fitting - I think hose splice connector
will do. I have used copper pipe elbow before - double clamp both ends.
The pump housing can be cleaned up and repaired with high temp epoxy,
providing the housing is not actually cracked or broken. Make sure it is a
good repair since as you know this can leave you stranded.
[Date: Thu, 15 Sep 2005 12:57:33 -0400
From: "Steve Gronback" <tgsgronback at mindspring.com>
Subject: Turbo after run pump
To: 200q20v at audifans.com
Message-ID: <410-220059415165733174 at mindspring.com>
Content-Type: text/plain; charset=US-ASCII
tgsgronback at mindspring.com
The After run turbo pump let go in my car. First time I had to tow the car
Can I repair the pump....it sprays from the center of what appears to be
two plastic discs?
Can I temporarily by-pass the pump?
Or, should I just go ahead and order a new one before digging in.....
More information about the 200q20v