Pro Con Ten-fusion
pcschulz at comcast.net
Tue Aug 15 19:34:29 EDT 2006
this may help:
At 03:30 PM 8/15/2006, Kneale Brownson wrote:
>I remain inexperienced and confused....What does one do with the ProConTen
>cables when extracting the transmission?
>1. Do I unbolt the bracket attached to the body?
>2. Or do I somehow loop cables off the invisible connection to the tranny
>I finally have all the hidden bolts out of the connection between the
>tranny and engine castings. I can slide the tranny about a quarter inch
>back. Looks like the cables tighten then. That's as much as I've been
>able to figure out. Bentley directions led me to think there is a bracket
>attached to the tranny, but now I'm thinking it's the one attached to the
>passenger side of the driveline tunnel that gets detached.
>200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
Chelmsford Ma, USA
1991 200 20v Q Avant Titan Grey
1991 200 20v Q Avant Indigo Mica
1991 90 20v Q Red
1990 CQ silver (awaiting S2 engine transplant)
1991 CQ silver (potentially replacing the 1990 for the transplant)
1990 CQ red ( to part or not)
More information about the 200q20v